 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| STGD7NB60K STGP7NB60K N-channel 600V - 7A - TO-220 / DPAK Short circuit rated PowerMESHTM IGBT General features Type STGD7NB60K STGP7NB60K VCES 600V 600V VCE(sat)Max @25C < 2.8V < 2.8V IC @100C 7A 7A 3 3 1 2 High input impedance (voltage driven) Low on-voltage drop (Vcesat) Low gate charge High current capability High frequency operation Short circuit rated TO-220 1 TO-252 Description Using the latest high voltage technology based on a patented strip layout, STMicroelectronics has designed an advanced family of IGBTs, the PowerMESHTM IGBTs, with outstanding performances. The suffix "K" identifies a family optimized for high frequency motor control applications with short circuit withstand capability. Internal schematic diagram Applications High frequency motor controls SMPS and PFC in both hard switching and resonant topologies Order codes Part number STGD7NB60KT4 STGP7NB60K Marking GD7NB60K GP7NB60K Package DPAK TO-220 Packaging Tape & reel Tube January 2007 Rev 3 1/15 www.st.com 15 Contents STGD7NB60K - STGP7NB60K Contents 1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................ 6 3 4 5 6 Test circuit ................................................ 9 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 2/15 STGD7NB60K - STGP7NB60K Electrical ratings 1 Electrical ratings Table 1. Symbol VCES IC(1) IC(1) ICM(2) VGE PTOT TSC Tstg Tj Absolute maximum ratings Value Parameter TO-220 Collector-emitter voltage (VGS = 0) Collector current (continuous) at TC = 25C Collector current (continuous) at TC = 100C Collector current (pulsed) Gate-emitter voltage Total dissipation at TC = 25C Short circuit withstand Storage temperature Operating junction temperature 80 0.64 - 65 to 150 C 150 600 14 7 56 20 70 0.56 DPAK V A A A V W s Unit 1. Calculated according to the iterative formula:: T -T JMAX C I ( T ) = ----------------------------------------------------------------------------------------------------CC R xV (T , I ) THJ - C CESAT ( MAX ) C C 2. Pulse width limited by max junction temperature Table 2. Symbol Rthj-case Rthj-amb Thermal resistance Parameter Thermal resistance junction-case Max Thermal resistance junction-ambient Max TO-220 1.56 62.5 DPAK 1.4 100 Unit C/W C/W 3/15 Electrical characteristics STGD7NB60K - STGP7NB60K 2 Electrical characteristics (TCASE=25C unless otherwise specified) Table 3. Symbol VBR(CES) VCE(sat) VGE(th) ICES IGES gfs Static Parameter Collector-emitter breakdown voltage Test conditions IC= 1mA, VGE= 0 Min. 600 2.3 1.9 5 2.8 Typ. Max. Unit V V V V A A nA S Collector-emitter saturation VGE= 15V, IC= 7A voltage VGE= 15V, IC= 7A, Tc= 125C Gate threshold voltage Collector cut-off current (VGE = 0) Gate-emitter leakage current (VCE = 0) Forward transconductance VCE= VGE, IC= 250 A VCE= Max rating,TC= 25C VCE=Max rating,TC= 125C VGE= 20V, VCE= 0 VCE = 15V, IC= 7A 7 50 500 100 3.7 Table 4. Symbol Cies Coes Cres Qg Qge Qgc tscw Dynamic Parameter Input capacitance Output capacitance Reverse transfer capacitance Total gate charge Gate-emitter charge Gate-collector charge Short circuit withstand time Test conditions VCE = 25V, f = 1MHz, VGE = 0 VCE = 480V, IC = 7A, VGE = 15V, (see Figure 17) VCE=0.5V VBR(CES), RG=10 VGE=15V, Tj=125C 10 Min. Typ. Max. 495 77 13 32.7 5.9 18.3 45 Unit pF pF pF nC nC nC s 4/15 STGD7NB60K - STGP7NB60K Electrical characteristics Table 5. Symbol td(on) tr (di/dt)on Eon tc tr(Voff) td(off) tf Eoff (2) Ets tc tr(Voff) td(off) tf Eoff (1) Ets (1) Switching on/off (inductive load) Parameter Turn-on delay time Current rise time Test conditions VCC = 480V, IC = 7A , RG= 10 VGE= 15V, Tj= 25C (see Figure 18) VCC = 480V, IC = 7A , RG= 10 VGE= 15V, Tj=125C (see Figure 18) Min. Typ. 15 6 Max. Unit ns ns Turn-on delay time Turn-on switching losses Cross-over time Off voltage rise time Turn-off delay time Current fall time Turn-off switching losses Total switching losses Cross-over time Off voltage rise time Turn-off delay time Current fall time Turn-off switching losses Total switching losses 980 95 105 30 50 100 140 200 227 68 52 150 300 395 A/s J ns ns ns ns J J ns ns ns ns J J VCC = 480V, IC = 7A, , RGE = 10 VGE = 15V, TJ=25C (see Figure 18) VCC = 480V, IC = 7A, , RGE=10 VGE =15V, Tj=125C (see Figure 18) 1. Eon is the tun-on losses when a typical diode is used in the test circuit in figure 2. If the IGBT is offered in a package with a co-pak diode, the co-pack diode is used as external diode. IGBTs & Diode are at the same temperature (25C and 125C) 2. Turn-off losses include also the tail of the collector current 5/15 Electrical characteristics STGD7NB60K - STGP7NB60K 2.1 Figure 1. Electrical characteristics (curves) Output characteristics Figure 2. Transfer characteristics Figure 3. Transconductance Figure 4. Normalized collector-emitter on voltage Figure 5. Gate charge vs gate-source voltage Figure 6. Capacitance variations 6/15 STGD7NB60K - STGP7NB60K Figure 7. Normalized gate threshold voltage vs temperature Figure 8. Electrical characteristics Collector-emitter on voltage vs collector current Figure 9. Normalized breakdown voltage vs temperature Figure 10. Switching losses vs temperature Figure 11. Switching losses vs gate resistance Figure 12. Switching losses vs collector current 7/15 Electrical characteristics Figure 13. Thermal Impedance for DPAK STGD7NB60K - STGP7NB60K Figure 14. Thermal Impedance Figure 15. Turn-off SOA 8/15 STGD7NB60K - STGP7NB60K Test circuit 3 Test circuit Figure 17. Gate charge test circuit Figure 16. Test circuit for inductive load switching Figure 18. Switching waveform Figure 19. Diode recovery time waveform 9/15 Package mechanical data STGD7NB60K - STGP7NB60K 4 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 10/15 STGD7NB60K - STGP7NB60K Package mechanical data TO-220 MECHANICAL DATA DIM. A b b1 c D E e e1 F H1 J1 L L1 L20 L30 mm. MIN. 4.40 0.61 1.15 0.49 15.25 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 TYP MAX. 4.60 0.88 1.70 0.70 15.75 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 MIN. 0.173 0.024 0.045 0.019 0.60 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 0.645 1.137 0.151 0.116 inch TYP. MAX. 0.181 0.034 0.066 0.027 0.620 0.409 0.106 0.202 0.052 0.256 0.107 0.551 0.154 oP Q 11/15 Package mechanical data STGD7NB60K - STGP7NB60K DPAK MECHANICAL DATA mm. DIM. MIN. A A1 A2 B b4 C C2 D D1 E E1 e e1 H L (L1) L2 L4 R V2 2.2 0.9 0.03 0.64 5.2 0.45 0.48 6 5.1 6.4 4.7 2.28 4.4 9.35 1 2.8 0.8 0.6 0.2 0 8 0 1 0.023 0.008 8 4.6 10.1 0.173 0.368 0.039 0.110 0.031 0.039 6.6 0.252 0.185 0.090 0.181 0.397 TYP MAX. 2.4 1.1 0.23 0.9 5.4 0.6 0.6 6.2 MIN. 0.086 0.035 0.001 0.025 0.204 0.017 0.019 0.236 0.200 0.260 TYP. MAX. 0.094 0.043 0.009 0.035 0.212 0.023 0.023 0.244 inch 0068772-F 12/15 STGD7NB60K - STGP7NB60K Packaging mechanical data 5 Packaging mechanical data DPAK FOOTPRINT All dimensions are in millimeters TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. A B C D G N T 1.5 12.8 20.2 16.4 50 22.4 18.4 13.2 mm MIN. MAX. 330 0.059 0.504 0.520 0.795 0.645 0.724 1.968 0.881 BULK QTY 2500 inch MIN. MAX. 12.992 TAPE MECHANICAL DATA DIM. A0 B0 B1 D D1 E F K0 P0 P1 P2 R W BASE QTY 2500 mm MIN. 6.8 10.4 1.5 1.5 1.65 7.4 2.55 3.9 7.9 1.9 40 15.7 16.3 inch MIN. MAX. 7 0.267 0.275 0.409 0.417 0.476 0.059 0.063 0.059 0.065 0.073 0.291 0.299 0.100 0.108 0.153 0.161 0.311 0.319 0.075 0.082 1.574 0.618 0.641 MAX. 10.6 12.1 1.6 1.85 7.6 2.75 4.1 8.1 2.1 13/15 Revision history STGD7NB60K - STGP7NB60K 6 Revision history Table 6. Date 21-Mar-2005 23-Jun-2006 26-Jan-2007 Revision history Revision 1 2 3 First release The document has been reformatted Typing error Changes 14/15 STGD7NB60K - STGP7NB60K Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 15/15 |
Price & Availability of STGF10NB60SD06
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |